GFCI Test Submenu

Top  Previous  Next

Settings Under the gFC Submenu.

gS -  GFCI Status

This item is not editable and does not respond to Jets1.  The value displayed shows the state of the GFCI, and only the following states should be possible while viewing this display:

.A        Armed

.t        Imminent or Tripping

.P        Passed

Manual GFCI Trip

gt - GFCI Trip Manually (displays value of .n)

This item is not editable – pressing Jets1 will cause the GFCI to be tripped before 10 or 12 seconds elapses, and thus will change the state to  to gS.t.

Note: The actual moment at which the GFCI will be tripped will not be predictable. This maintains the integrity of the test by making it difficult to simulate a GFCI trip.

gC - GFCI Clear (displays value of .n)

This item is not editable – pressing Jets1 will cause the memory of whether a GFCI test was passed to be cleared, and thus will reset the status to gS.A or GFCI Status - Armed.

Note: When the GFCI Status is Armed, the spa will run the GFCI Trip Test the next time the spa is power cycled.