Pr  or  PRIMING MODE TAKES 4 MIN  Message

The Spa is Operating in "Priming" (Pr) Mode.

The Spa has just been powered up and is in Priming Mode for 4 Minutes.  Pumps and Blower can be turned ON and OFF to Remove any Air from the Heater.  On EL and GL Systems Only, equipped with a "Mode" Button, the Ozone Generator can be Turned ON for 15 Seconds and OFF by using the "Mode" Button.  No Automatic Functions will turn ON during this time, and the Heater will Not Start.  This is Not an Error Message.  Wait 4 Minutes or Press any Temp Related Button to Exit Priming Mode to Normal Operation.

Note: On some Early VS and GS Systems (prior to Version 23) equipped with a "Mode" Button, the Ozone Generator can be Turned ON for 15 Seconds and OFF by using the "Mode" Button.

Continue for Detailed Priming Instructions.

Continue

Return to Other Messages          END

Return To Current Error Messages

_ML200Sm-PR

_ML400Sm-PR

_ML700Sm-PR

_ML900Sm-PR