Recheck Configuration

1.This Error Message Still  indicates that the Dip Switch Numbers Displayed or the Configuration Setting Values Displayed on the Topside Panel, following the "CFE" or "CONFIG ERROR" Message, are in Conflict with each other.
2.Check the Switch Numbers or Setting Values Displayed, and Correct as Necessary to Match the Equipment in the Spa System.  If you are Confident that you have Corrected the Problem, Select "Problem Found and Corrected" Below.  If you are not Sure, and need  help with the Settings, Continue to Step 3.

Problem Found and Corrected

3.Check for a 2-Pin Jumper Installed on Both pins of CFG J83 on the System Board indicating Configuration Settings are turned ON.

YES

OtherConnectors-CFG-ON

 

NO

OtherConnectors-CFG-OFF