|1.||If Both Sensors have already been Replaced in a Previous Step, Select "Both Sensors Already Replaced" Below. If Both Sensors have Not been Replaced, Continue to Step 2.|
Both Sensors Already Replaced
Note: You Must Turn OFF the Power to the System before Continuing. Defective Sensors can Not be Repaired, and Must be Replaced. Make sure the System Board is completely Dry before Turning the Power back ON.
|1.||Remove and Replace the Sensor or Sensors that have Not been Replaced in a Previous Step.|
|2.||Make sure Both Temperature Sensors are Properly Mounted at the Heater.|
|3.||Make sure the System Board Sensor Connectors are Clean and Connected Properly.|
Both Sensors Replaced - Continue