Example: Adding an Auxiliary Jet Pump to the Spa.
Enter Configuration Mode, and once Setup is Verified, the Setup Devices Screen will appear.
1. Scroll Down to the Second Screen and then to the Third Screen.
2. Scroll Down to an Unassigned Aux Device, and Move Right to the Next Screen.
3. On Add Device, Move Right to Add the Jet Pump.
4. On Mode, Select the Pool/Spa Mode that you want the Jet Pump to Operate in (Spa or Pool + Spa).
5. Scroll Down to Device Type, and Select Relay.
6. Scroll Down to Maximum Speed, and Select On/Off for a Single Speed Jet Pump OR Select H/L/Off for a Dual Speed Jet Pump.
7. Scroll Down to Output 1, and Select Internal. If the Jet Pump is Controlled by an Expansion Box, Select External.
8. Scroll Down to Expansion Boxes, and Only if the Jet Pump is Controlled by an Expansion Box, Select an Expansion Box Number (1-8).
9. Scroll Down to Device No., and Select the Relay Number (2-8) that the Jet Pump is Wired to.
10. Scroll Down to Output 2 on the Next Screen, and Only for a Dual Speed Jet Pump, Select Internal or External.
11. Scroll Down to Expansion Boxes, and Only for a Dual Speed Jet Pump which is Controlled by an Expansion Box, Select an Expansion Box Number (1-8).
12. Scroll Down to Device No., and Only for a Dual Speed Jet Pump, Select the Relay Number (2-8) that the Jet Pump High Speed is Wired to.
13. Scroll Down to Freeze Protect, and Select Enable. Always Enable Freeze Protection for All Pumps.
14. Scroll Down to Valves, and Select Disable.
15. Scroll Down to Rename Device, and Move Right to Spell and Save the New Device Name.
16. Navigate Left, Right, Up, and Down to the Desired Letter, and Select the Letter to Spell your New Name. When the New Name is Complete, Select Save to Save the New Name.
Continue To Adding A Solar Heater Valve
Continue To Exiting Configuration Mode