A Second Wireless Panel can be Added to the System. The Panel LED's and Device Order can be set up independently on each Wireless Panel.
Note: In addition to this Method, the Second Wireless Panel can also be Added at the Service Panel exactly the same way as the First Wireless Panel.
1. On the First Wireless Panel , From the Display Screen, Move Right to the Main Menu.
2. Scroll Down to Setup, and Move Right to the Setup Screen.
3. Scroll Down to Wireless Setup, and Move Right to the Wireless Setup Screen.
4. Scroll Down to Add Device, and Do Not Press Select Yet.
5. On the Second Wireless Panel to be Added , From the Display Screen, Move Right to the Main Menu.
6. Scroll Down to Setup, and Move Right to the Setup Screen.
7. Scroll Down to Wireless Setup, and Move Right to the Wireless Setup Screen.
8. With Add Me Highlighted , Wait and Do Not Press Select Yet.
9. On the First Wireless Panel , Press Select to Add the Second Wireless Panel to the System.
10. A Message on the First Wireless Panel Screen will Instruct you to Press Select on the Second Wireless Panel to Add it to the Network.
11. On the Second Wireless Panel to be Added , Press Select, and then Press Select a Second Time
12. On the First Wireless Panel , A Message on the Screen will Indicate that the System Network is Training itself to Communicate with the Second Wireless Panel, and Instruct you to Wait.. for completion.
13. When the Training is Complete, the Message will Change from Wait.. to Success. The Second Wireless Panel should now be Communicating with the System Network.
14. On the Second Wireless Panel , Panel Added will appear briefly on the Screen, and then the display will revert to the Display Screen.
15. On the First Wireless Panel , Move Left to Exit Wireless Setup and Return to the Setup Screen.
16. Move Left again to Exit the Setup Menu.
17. Move Left again to Exit the Main Menu.
Continue To Adding Remote Management System
Return To Panel Operation Index