The Wireless Remote Management Gateway Must be Connected to your Computer Network Before it can be Trained to Communicate with the Pool Control System.
1. Connect one end of an Ethernet Network Cable to the Network Receptacle on the Wireless Gateway. Plug the other end of the Ethernet Network Cable into any Available Connection Point on the Local Network (Router, Hub, Switch, etc.).
2. Connect the AC Power Adapter to the Power Receptacle on the Wireless Gateway, then plug the AC Power Adapter into a wall outlet.
3. The Link LED will Light Up Green when a Connection is made with the Network.
4. After a few seconds the Status LED should stop flashing red and Stay ON Orange, indicating the Status of the Wireless Gateway as described in Controls and Indicators.
5. The Wireless Gateway should now be Connected to the Internet and Communicating with the Balboa Server. The Wireless Gateway now needs to be Trained to Connect to the Pool Control System.
Continue To Training the Gateway
Return To Adding The Wireless Gateway
Return To Adding Remote Management System