Scenes are used to Assign one or more Devices to a Preset Timer.
For example, a Scene named "Evening" could be created that turns on a Pool or Spa Light, and an Auxiliary Device such as a Waterfall at the same time each evening. A Scene can also be Manually turned on or off. If multiple Devices are assigned to a Scene, they will turn on or off simultaneously when the Scene is turned on or off.
1. From the Display Screen on the Wireless Panel, Move Right to the Main Menu.
2. Scroll Down to Scenes / Timers, and Move Right to the Scene Control Screen.
3. Scroll Down to the First Scene that is Unused, and Move Right to the Scene Screen.
4. With Select Devices Highlighted , Move Right to the Device Selection Screen.
5. Scroll Down and Select All the Devices you want to Add to the Scene
6. After All the Devices have been Selected for the Scene, Move Left to Exit Device Selection.
7. Scroll Down to Scene Timeout, and Press Select to Set the Length of Time the Scene will Run if Turned On Manually and not Turned Off.
8. With the Hours Flashing. use the Up and Down Buttons to select the Number of Hours to Run. Then Press Select to Save.
9. Scroll Down to Timers, and Press Select to Enable the Scene Timers.
10. Scroll Down to Timer 1 Start, and Press Select to Set the Timer 1 Start Time.
11. With the Hour Flashing. use the Up and Down Buttons to select the Hour. Then Press Select to Save and Move to the Minutes.
12. With the Minutes Flashing, use the Up and Down Buttons to select the Minutes. Then Press Select to Save and Complete Scene Timer 1 Start Time Setting.
13. Move Left to Exit Scene Timer 1 Start Time Setting.
14. Scroll Down to Timer 1 Stop, and Press Select to Set the Timer 1 Stop Time.
15. With the Hour Flashing. use the Up and Down Buttons to select the Hour. Then Press Select to Save and Move to the Minutes.
16. With the Minutes Flashing, use the Up and Down Buttons to select the Minutes. Then Press Select to Save and Complete Scene Timer 1 Stop Time Setting.
17. Move Left to Exit Scene Timer 1 Stop Time Setting.
18. Scroll Down to Days To Run, and Move Right to the Next Screen to Select Days To Run.
19. Select All Days, or Scroll Down to Select Weekends, Weekdays, or you can Select the Days Individually. Move Left to Save and Exit the Days To Run Screen.
20. Scroll Down to the Next Screen, and with Timer 2 Start Highlighted , Press Select to Set the Timer 2 Start Time.
21. With the Hour Flashing. use the Up and Down Buttons to select the Hour. Then Press Select to Save and Move to the Minutes.
22. With the Minutes Flashing, use the Up and Down Buttons to select the Minutes. Then Press Select to Save and Complete Scene Timer 2 Start Time Setting.
23. Move Left to Exit Scene Timer 2 Start Time Setting.
24. Scroll Down to Timer 2 Stop, and Press Select to Set the Timer 2 Stop Time.
25. With the Hour Flashing. use the Up and Down Buttons to select the Hour. Then Press Select to Save and Move to the Minutes.
26. With the Minutes Flashing, use the Up and Down Buttons to select the Minutes. Then Press Select to Save and Complete Scene Timer 2 Stop Time Setting.
27. Move Left to Exit Scene Timer 1 Stop Time Setting.
28. Scroll Down to Days To Run, and Move Right to the Next Screen to Select Days To Run.
29. Select All Days, or Scroll Down to Select Weekends, Weekdays, or you can Select the Days Individually. Move Left to Save and Exit the Days To Run Screen.
30. Scroll Down to Allow Heat, and Press Select to designate whether the Heater should be Allowed to Run during the Scene.
31. Scroll Down to Rename Scene, and Move Right to Spell and Save the New Scene Name.
32. Navigate Left, Right, Up, and Down to the Desired Letter, and Select the Letter to Spell your New Name. When the New Name is Complete, Select Save to Save the New Scene Name.
33. Scroll Down to Run in Vacation, and Press Select to designate whether the Scene should Run while in Vacation Mode.
34. Move Left to Exit Scene Setup.
35. Scroll Down to Yes, and Press Select to Save the New Scene Settings.
36. Continue Creating New Scenes or Move Left to Exit Scene Control.
37. Move Left again to Exit the Main Menu.
Continue To Clearing A Scene
Return To Panel Operation Index