The first thing you must do before making changes to the configuration is to create communication between the System and the Panel by "Training" the Panel.
TO TRAIN THE WIRELESS PANEL: The System should be Powered Up. You will need to be standing in front of the System Box, within reach of the Service Panel inside the Box.
1. From the Display Screen on the Wireless Panel, Move Right to the Main Menu.
2. Scroll Down to Setup, and Move Right to the Setup Screen.
3. Scroll Down to Wireless Setup, and Move Right to the Wireless Setup Screen.
4. Be sure Add Me is Highlighted on the Wireless Setup Screen.
5. On the Service Panel in the System Box, Press the Network Button.
6. Use the Up and Down Buttons to Scroll to Add Device on the Service Panel Display.
7. On the Wireless Panel, with Add Me Highlighted on the Wireless Setup Screen, Press the Select Button. A prompt should appear for the next two steps.
8. On the Service Panel, with Add Device on the Display, Press the Select Button.
9. On the Wireless Panel, Press the Select Button Again.
10. Panel Added will appear briefly on the Screen, and then the display will revert to the Display Screen.
11. On the Service Panel, Adding... OK will appear on the Display, and then the Display will revert back to Automatic Mode after a short time.
Continue To Entering Configuration Mode