The Remote Management Settings Menu allows you to Setup, View, or Modify your General Pool Settings, Options, and Timers.
1. Click on the Settings Tab to Open the Settings Menu.
2. Click on the Drop Down Menu Button to View the List of Pool Setting Options to View, Modify, or Setup.
3. To Set the Correct Day and Time, Click on Pool System Day and Time on the Settings Drop Down Menu.
4. Enter the Correct Time in the Set Time Boxes, and Click on AM or PM.
5. Click on the Choose Day Drop Down Calendar Button, and then Click on the Correct Date.
7. To Set the Filter Cycle Timers, Click on Pool System Filter Cycle Timers on the Settings Drop Down Menu.
8. Set the First Filter Cycle Start Times, End Times, Pump Speed, and Days to Run for One or Both Timers for the Selected Filter Cycle. Then Click on the Filter Enabled Box to Enable the Timers.
9. To Set Additional Filter Cycle Timers, Click on the Filter Cycle Drop Down Menu and Select another Filter Cycle.
10. To Setup, View, or Modify the Heater Settings, Click on Heater on the Settings Drop Down Menu.
11. Enter the Set Pool Temp and Set Spa Temp in the Boxes. Then Click on Heater Enable or Heat Pump Enable to Enable the Heater.
12. Click on the Pool Mode Heat or Spa Mode Heat Drop Down Menu Button, and Then Click on How you want the Heater to be Controlled when the Water Temperature is Below the Heater Set Temperature.
Click on Manual if you want to Only Manually turn the heater On.
Click on Heat in Filter if you want the Heater to Only turn On during the Filter Cycles.
Click on Polling > if you want the Heater to operate Any time the Water Temperature Drops Below the Heater Set Temperature, based on the System Polling the Water Temperature Periodically. To Set the Polling Times, Scroll Down below the Pool Mode Heat Box to the Timer Boxes.
13. To Setup, View, or Modify the Water Chemistry Settings, Click on Chemistry on the Settings Drop Down Menu.
14. Enter the High Alert and Low Alert Values for pH, ORP, and TDS in the Alert Setup Boxes.
15. To Setup or Modify your Chlorine Generator Settings, Scroll Down the Chemistry Menu to Ecomatic Setup. Enter the Set ORP Level Value in the Box, and Then Click on Chlorine Generator Enable to Enable the Chlorine Generator. Click on POC Control On to Automatically Generate Chlorine as Required to Maintain the Entered ORP Level.
16. To Setup, View, or Modify the Scene Timer Settings, Click on Scene Timers on the Settings Drop Down Menu.
17. Set the Scene Timeout, Start Times, End Times, and Days to Run for the Selected Scene. Then Click on the Timers Enabled Box to Enable the Timers.
18. To Setup, View, or Modify the Pool System Alert Settings, Click on the Pool System Alerts Link Below.
Return To Using Remote Management
Continue To Pool System Alerts
Return To Adding Remote Management System