The Wireless Gateway should Always be Reset After Initially Configuring the Gateway, or Changing the Configuration of the Gateway.
Note: It may also be necessary to Reset the Wireless Gateway after your Computer Network has been Turned Off and back On again, or if your Network has been Rebooted or Reconnected.
1. On the Wireless Gateway, Press and Hold the Train/Reset Button for 10 Seconds. The Status LED will turn ON Orange, and then Change from Orange to Red. Release the Train/Reset Button after the Status LED Changes to Red.
2. The Wireless Gateway will now Locate and Connect to the Pool Control System and the Balboa Remote Management Server.
Continue To Setting Up Your Account
Return To Configuring The Gateway
Return To Adding Remote Management System