Several Panel Display Functions can be Set to User's Preference.
1. From the Display Screen on the Wireless Panel, Move Right to the Main Menu.
2. Scroll Down to Setup, and Move Right to the Setup Screen.
3. Scroll Down to the Bottom, and Continue Down to the Next Screen.
4. Scroll Down to Display, and Move Right to the Display Screen.
5. With Backlight (Min) Highlighted , Press Select to Set the Amount of Time that the Wireless Panel will stay Lit after a Button Press.
6. With the Number of Minutes Flashing, use the Up and Down Buttons to select the Number of Backlight Minutes. Then Press Select to Save and Exit Backlight Minutes.
7. Scroll Down to Sleep Time (Min), and Press Select to Set the Amount of Time that the Wireless Panel will Stay On before going into Sleep Mode to Conserve Battery.
Note: The Wireless Panel will only go into Sleep Mode when it is Operating on Battery. When it is connected to Power, it will Stay On.
8. With the Number of Minutes Flashing, use the Up and Down Buttons to select the Number of Sleep Time Minutes. Then Press Select to Save and Exit Sleep Time Minutes.
9. Scroll Down to Assign Display 2, and Press Select to Set Display 2 to Air Temp, Pool Temp, Spa Temp, pH. ORP, TDS, Filter Psi, or Solar Temp.
10. Scroll Down to Key Tone, and Press Select to turn the Keypad Tone On or Off.
11. Scroll Down to LCD Contrast, and Press Select to Set the LCD Contrast on the Wireless Panel Display.
12. Move Left or Right to Adjust the LCD Display Contrast. Then Press Select to Save and Exit LCD Contrast.
13. Continue to Set the Display Preferences, or Move Left to Exit Display Preferences.
14. Continue with Additional Setup, or Move Left to Exit the Setup Menu.
15. Move Left again to Exit the Main Menu.
Continue To Renaming Devices
Return To Panel Operation Index