| 1. | Turn OFF the Power to the System and Turn it back ON again to put System into Priming Mode. |
| 2. | After about 45 Seconds, Check for Error Messages on the Topside Panel Display. If there is No Error Message, Select "No Error Message" Below. If there is Now an Error Message, select Message Other than rtC or RTC FAILURE below. |
No Error Messages
| 3. | If there is Now a Message Other than a "rtC" or "RTC FAILURE" Real Time Clock Error Message, that Message will Now have to be Diagnosed. Select "Message Other than rtC or RTC FAILURE" Below. If there is Now a "rtC" or "RTC FAILURE" Real Time Clock Error Message, contact your Dealer or Service Organization. |
Message Other than rtC or RTC FAILURE
|